How to Set Up LAN Network

A Local Area Network, or LAN, is used to connect computing resources, typically inside one building. The computing resources can be computers, printers, servers, IP phones, or gateways. You must first identify which services you need to provide locally on the LAN. Computers are connected to a switch with Ethernet cables. Each device has a unique IP address.

Things You’ll Need

Cable router
Crossover Ethernet cables
Ethernet cables
Ethernet switch
Network interfaces

Create Network

Identify the local services that you want available on the network. Identify network-attached printers, network disk drives, any server that will share printers or disks.

Identify how many devices will have to connect to the network. Each device, server or workstation will require a unique address.

Run cables to workstations where possible. A wired LAN will always get better performance and be more secure than a wireless LAN. Wherever possible, run a cable to servers, printers, IP phones or work locations. Run a cable to any area where you are likely to work. Use standard Ethernet cables or building wiring as installed according to the TIA-568 standard.

Select and purchase a switch or cable router. The simple secure way to connect to the Internet is to use a cable router. Many makes and models are available. If the model you choose does not have enough ports to connect all of your computers, then you will need to purchase a switch as well.

A network switch has multiple ports to allow connection of multiple computers.

Configure the WAN port of the cable router. Router Configuration details will vary from vendor to vendor. Key information you will need to configure the WAN port will be supplied by your internet service provider.

The WAN port of an internet router is typically set apart from the other ports.

Configure the LAN ports of your cable router. Most cable routers will act as a Dynamic Host Configuration Server, or DHCP server. This means that the router will give addresses to workstations automatically. Be certain that the address pool has enough addresses for all of the workstations. Make certain that there are enough addresses outside of the range for any hosts that need static addresses. For example, a network address with a mask of has a total of 254 hosts. If the dynamic pool has 200 addresses available, that means the remaining 54 addresses are available to give printers or servers static addresses.

Connect the wires for the network. Workstations and servers can be connected with standard Ethernet cables. Connect the switch to the cable router LAN ports by using the up-link or straight port on the switch. If the switch does not have an up-link port, connect any standard port of the switch to a LAN port on the cable router with an Ethernet crossover cable. Ethernet rossover cables can be purchased at any electronics store.

Standard Ethernet cables connect computer interfaces to the switch.

Test the services and Internet connectivity. Test each of the workstations to ensure they can connect to the Internet and test any local servers and printers. Print test pages on the shared printers. Test read and write permissions on shared file servers by copying files to the servers and copying files from the server to a workstation.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s